Natural Start Bottle

Before first use, disassemble and place all components in boiling water for 5 minutes to ensure hygiene. Follow the below steps to ensure your bottle is safe and ready to use:

1. Disassemble your bottle
2. Wash all parts in warm soapy water and rinse or use a dishwasher (top shelf only).
3. Use a nipple brush to gently clean the nipple (C). Do not turn it inside out as this may cause damage. Do not clean the feeding hole or anti colic valve (D) with the brush as damage may occur.
4. Reassemble your nipple (C) and screw ring (E) and then place all the parts in boiling water for 5 minutes or use another method of sterilization such as microwave (see ‘How to self-sterilize’ tab), UV or steam sterilization or cold water tablet/liquid solution.
5. After sterilizing, reassemble your bottle ready to use.
6. To prevent the nipple (C) from collapsing during feeding, pinch the valve (D) gently between your fingers to ensure it’s open.

• Inspect before each use and pull feeding nipple in all directions
• Always clean and sterilize before each use.
• Keep away from solvents or harsh chemicals.
• Do not allow the product to come into contact with oil based foods.
• Not suitable for use in a conventional oven or a combination microwave oven with the grill feature switched on.
• Do not leave the feeding nipple in direct sunlight or heat, or leave in disinfectant (“sterilizing solution”) for longer than recommended, as this may weaken the nipple.
• Nipples are recommended to be replaced at least every 2 months for safety and hygiene reasons.
• Please dispose of this product and packaging responsibly.

The valve will work wherever it’s positioned but the best place for the valve is at the top, near your baby's nose.

The simple answer is no, due to the different valves. Most of our products have interchangeable parts to make life as simple as possible. But the Natural Start nipples have a built-in air valve, and don’t work properly on our Advanced Anti-Colic bottles.

Nipples take quite a lot of hammering from little gums and teeth, so they need to be changed regularly. We recommend replacing teats every 2-months or at the first sign of any damage or weakness.

All of our bottles except the 340ml version currently come with slow flow nipples as standard, as they’re best for newborns and most parents generally stock up on bottles before baby arrives. Our 340ml bottle comes with a medium flow nipple.

As your baby grows and can feed more quickly, you can buy faster flowing replacement nipples.

We have medium flow nipples, which most babies are ready for at around 3 months, and a fast flow nipple which is best from around 6 months. The ages are only guides though - you know your baby better than anyone and will be able to tell when they’re ready for a faster flow

All Tommee Tippee bottles are BPA-free. They’re made of a plastic called polypropylene that’s lightweight, easy to clean, and completely safe. BPA - that’s (CH₃)₂C(C₆H₄OH)₂ for you science geeks - is a chemical that’s been used in some plastics since the 1960s and it’s believed to mess around with your hormones. It’s generally not good, so we don’t use it.

Yes, our bottles love to look after your breast milk. We even have special lids that you can pop on to store your milk in the fridge or freezer. If you’re expressing and storing breast milk, our Express and Go™ range may be handy too - it features a clever pouch that you use to express, store, warm and feed (it’s our all in one show). This means there’s no need to transfer milk at any stage, so you’ll never lose a precious drop.

Yes. Our Natural Start and Advanced Anti-Colic bottles are made from polypropylene (PP) that can happily be recycled.

The anti-colic valve in the nipple prevents excessive air from getting into the baby’s milk, helping to reduce the symptoms of colic. The valve is designed to allow air to enter and seal with every gulp, making it anti-colic and leak-proof. 

The 50ml of water in the bottle will turn into steam when microwaved*. The steam reaches the temperature necessary to sterilise, killing virus and 99.9% of bacteria. The steam travels around the bottle and through the holes in the screw ring to reach the external surface of the nipple and the internal surface of the hood.

*Based on microwaves from 700 to 1000 Watts.

PLEASE NOTE: It’s important that the silicone teat is not tightened on to base when self-sterilizing in microwave to allow the steam to flow.

Our Closer to Nature bottles have been replaced by our new Natural Start Bottles. They’re the same in nearly every way; the only change is that we’ve made it possible to self-sterilize them in the microwave now and they’ve got new packaging and a new name.

If you’re still looking for an answer, get in touch with us here