LetsGo Portable Bottle Warmer

1. Lid
2. Integrated stainless steel neck
3. Silicone sealing ring
4. On/Off and temperature selection
5. USB cable charging port

1. Take a prepared baby bottle that requires warming, either breast milk from storage or formula milk made up as per manufacturer guidelines.
2. Put the warmer upside down and screw on the baby bottle securely.
3. Press the power button on the unit’s base for 2 seconds.
4. Select a temperature by single clicking through the options on the digital display.
5. The warmer will then start to heat automatically, it will beep when he desired temperature has been achieved.
6. The warmer will now keep the milk at the chosen temperature.
7. Turn the unit so that the bottle’s base is flat on the surface and unscrew the warmer from the bottle. Remember to always check the milk’s temperature before feeding.
8. Finally, press and hold the power button for 2 seconds to turn the unit off.

You can sterilise the white plastic connector rings, but the heat plate and electrical unit itself cannot be sterilised. To clean the unit, we recommend that you follow the instructions above to remove any milk residue, and then wipe thoroughly with an anti-bacterial wipe.

We recommend you descale the product daily according to the guidelines below to ensure that it continues to work efficiently…

• Turn off the unit and allow to cool before descaling, wipe with a damp cloth only.
• Use a descaler that’s suitable for use with stainless steel i.e., coffee or iron descaler and use as per the manufacturer's guidelines. Or you can use white vinegar or a descaling sachet to descale your unit.
• Please use as per manufacturer's guidelines. Where no method is stated, use 15ml of white vinegar and 15ml water.
• After descaling wipe the unit clean and use mild liquid soap to clean the heat plate.

The Tommee Tippee LetsGo Bottle Warmer is compatible with Tommee Tippee, MAM® and Philips Avent® bottles. For MAM® and Tommee Tippee bottles use the adapters provided, for Philips Avent® screw the bottle directly to the warmer.

Do not use the LetsGo to warm glass bottles.

1. Battery Power Display: When the unit is turned off, press the On/Off button to see the its current battery power level. When it shows ‘100’, it’s fully charged and 100% power is available.
2. Low Power Display under working state: ‘Lo’ will blink on the unit’s digital display for 6 seconds to warn you that the battery level is below 20%. When this shows, please charge your LetsGo unit.

The LetsGo's battery takes 4 hours to charge fully, and one full charge provides enough power to warm up to seven 150ml or four 260ml bottles.

Any defect due to faulty materials or workmanship which occurs while the Product is covered by this Guarantee.

This Guarantee does not cover wilful damage, negligence or minor cosmetic damage caused by fair wear and tear.

This Guarantee covers Products for two years from the date of purchase.

We will keep a record of when you purchased your Product in your Tommee Tippee account, there is no need to register.

If you have purchased any Tommee Tippee items from another retailer, online or in-store, you should address any issues you have to that retailer or website in the first instance. Your statutory rights are against the retailer that sold you the Product.

This Guarantee only covers Products for two years from the date of purchase. Do not worry if a defect occurs after this time, we still want to help, so please contact us in the same way you would if you were making a claim.