Soothers

Do you have a question about Tommee Tippee Soothers? Find the answers here:

Before first use

• Before first use place the soother in boiling water for 5 min, allow to cool, and squeeze out any trapped water from the soother. This is to ensure good hygiene.

How to use your soothers

• Do not store in direct sunlight or near a source of heat.
• Do not store with or allow to come in to contact with solvents or harsh chemicals.
• Never dip teat in sweet substances or medication, your child may get tooth decay.
• Replace the soother after one month, for safety and hygiene reasons.
• If the soother becomes lodged in your baby’s mouth, DO NOT PANIC; it cannot be swallowed.. Remove from baby’s mouth with care, as gently as possible.
• When the soother is not in use, for instance after sterilization, keep in a dry covered container.

• Before first use place the soother in boiling water for 5 min, allow to cool, and squeeze out any trapped water from the soother. This is to ensure good hygiene.
• Clean before each use. Wash in warm soapy water and rinse in clean water or use a dishwasher, top shelf only. Remove any water that may have entered the teat by squeezing the teat. Do not clean with solvents or harsh chemicals.
• Suitable for sterilisation by steam (electric and microwave), boiling or cold water tablet/liquid solution.
• DO NOT sterilise the display case. It is not intended to be used for sterilisation or storage and should be disposed of correctly.

• Suitable for sterilisation by UV, steam (electric and microwave), boiling or cold water tablet/liquid solution.
   

  Steriliser Case – Operation Guide

  1.     Add water to the 30ml mark in one half of the steriliser case and place one or two soothers in it, ensuring the teats are submerged.

  2.     Close the steriliser case securely noting a locking click in each corner.

  3.     Ensure the microwave heat plate is clean. Microwave on high power (750-1000w) for 4 minutes

  4.     After microwaving, allow to cool. WARNING Contents may still be hot.

  5.     Carefully remove the case, pour out any remaining water, and close it securely.

  6.     Check soothers have cooled before use.